Beauty instrument shell

Beauty instrument shell spraying processing of the first process is pre-treatment, pre-treatment special need to pay attention to the problem of the material itself and dirt. The quality of the shell has a great relationship with the front treatment section and electrostatic dust removal, the size of the electrostatic gun, the oil of the spray gun, the spraying experience and technology of the operator.
1. Pre-treatment section:

The pre-treatment section includes the upper piece, the wipe piece, the effect, the dust removal, etc., if the material is particularly dirty, more people need to do in the wipe piece, otherwise the treatment effect is not ideal;

2. Electrostatic dust removal section:

Beauty products spraying requirements are relatively high, this section is essential, otherwise there will be a lot of dust adsorption on plastic parts, spraying processing plastic spray surface will have a lot of granular, so that the yield is reduced;

3. Spraying section:

This section is the key to the technical problems of the spray processing master, a good master will put all the problems that may occur before production avoid in advance, in order to create good products, a good master is indispensable;

4. Drying section:

This section should pay attention to the temperature and baking time, beauty instrument plastic spraying processing generally 40 ~ 90 degrees is the best, depending on the material and process requirements of the workpiece, different processes, performance test standards are not the same, baking temperature is not the same.

5. Next paragraph.

What should be paid attention to in this section is the operator's operation techniques to prevent the products sprayed out from scratching and other problems in the later stage. Therefore, the quality inspection department should pay attention to every product appearance details.